GOVERNMENT CCR CAGE NUMBER: 51U53

12V DC Motion Sensor Switch Day and Night Adjustable Delay

12V DC Motion Sensor Switch Day and Night Adjustable Delay - 60W
SKU: BRXMS12VDC5AND
Manufacturer part number: BRXMS12VDC5AND
Availability: 8 in stock
$35.50
$8.45
$2.75
Condition: New

WORKS ON FULL BRIGHT SUN !!

- Control your 12V DC devices using a motion sensor detector.
You can control LED, CFL and Regular 12V DC light bulbs.
Animal feeders can be controlled so it will not waste food when animals are not around.
Delay time is cumulative. So, if you the sensor keeps detecting movement it will not shut off. After the last movement is detected the sensors will shut off after 1 Minute.
Delay time is also adjustable from 1 minute up to 10 minutes.

- Delay time: After detecting movement the module will output a signal triggering the sensor to switch lights ON. Delay time is cumulative. So, if you the sensor keeps detecting movement it will not shut off. After the last movement is detected the sensors will shut off after 1 Minute (or the delay time you have adjusted to).
- It will turn ON Day or Night.
- Don’t exposed the unit to direct sun light, wind, vibration, heater or air conditioning.
- Don’t fix it at a place where there are obstructing material (e.g. Glass, dense clothes) which Infrared cannot get though.
- The first time the unit is powered, it will need about one minute for initialization. During this time the signal triggered by the module will not be stable. After one minute the module will work normally.
- The sensitivity for left-right direction is better than up-down direction, so please make sure the installation direction is left-right.
- Connect the load wires (light bulb) first following by the power wires. Please ensure short circuit cannot occur between connecting wires before you turn on the power.
- The unit must be protected from the weather as It is not waterproof.


1.Detection range: 80°
2.Detection distance: 5m (15ft) (MAX.<24°c)
3.Power source: 12V/DC
4.Maximum load: 60W
5.Working temperature: -10°c~+40°c
6.Duration time: 1~10 Minutes (Cumulative/Adjustable)
7.Ambient light: Any
8.Detection motion speed: 0.6~1.5m/s
9.Working Humidity: <93%RH
10. Standby power consumption: 1W
11. External dimension: L68ΧW48ΧH98mm

We ship worldwide.
- Hablamos Español.        - Nous parlons Français.

Additional Notes:
Product tags